DR 30.00 COMMERCIAL RAPID-FEED CHIPPER, Руководство по безопасности и эксплуатации

Страница: 62 / 80

58 30.00 COMMERCIAL
DR
®
RAPID-FEED™ CHIPPER
nd
9. Pull the excess wire to the front of the Chipper.
11. Hitch Bolt, wrap the White (Ground)
Wire around the Bolt, and then re-tighten with two
12. Roll up the extra wire and wire tie it to the Tow Bar.
NOTE: We recommend that you wrap the Harness wires together
with e ire
Harness Connector end and going ba
either side of the Frame
7. Attach both Light Brackets to the Frame with Bolts a
Locknuts with two 1/2" wrenches ( Figure 64 ).
Light
Bracket
Figure 64
Bolt and
ocknut L
Ground
Wire
Figure 66
le Tie
Wire
ar
Trailer
Hitch Bolt
Cab
Excess
to Tow B
Wire Harness
Figure 65
Cable
Ties
8. Secure the Wires under the Frame with Cable Ties at
the four places shown ( Figure 65 ).
10. Strip 1" of insulation from the end of the White
(Ground) Wire.
Loosen a Trailer
3/4" wrenches ( Figure 66 ).
lectrical tape about every twelve inches starting at the W
ck to where the wires go to
.