www.drtrustusa.com
www.drtrustusa.com
12
13
The LCD display shows the results for object
temperature value.
with a beep sound.
Press and release the Measure button in 1 second
Press the measure button to start the object
temperature measurements.
Keep the thermometer about 1-5cm away from
the object.
Note:
Measures surface temperature and not the internal temperature of
objects or items like food etc.
Needs adjustments depending on your requirements.
Measurements can be affected by moisture, dust, smoke or other
particles in the air.
Moreover, the thermometer is very useful if used correctly. However, before
start using it, you need to understand its limitations.
After A Temperature Measurement
After each measurement, you can enter the recall mode and query
thermometer away from the forehead/ear and observe temperature.
earlier temperature readings.
Once the temperature measurement has been completed, remove the
Please wait for 10 seconds between each measurement.
Do not hold the thermometer for a long time, because it is sensitive
Note
After each measurement, clean the temperature probe with a soft
cloth, and put the thermometer in a dry and well-ventilated place.
to the ambient temperature.
It is dangerous to make a self-diagnosis or self-treatment based on the
obtained measurement results. For such purposes, please consult a doctor.
Temperature Reading
In forehead or ear mode T indicates a temperature reading.
Intelligent Light Indicator
3. If 38°C
≦
T
≦
42.9°C(100.4°F
≦
T
≦
109.2°F), the red light will last for 3
seconds, with 5 short beeps, and the value in L
CD flick
ers, which is a
warning that you may have a high fever.
2. If 37.4°C
≦
T
≦
37.9°C(99.3°F
≦
T
≦
100.3°F), the orange light will last for
3 seconds, with 3 short beeps, and the value in L
CD flick
ers, which is a
warning that you may have a light fever.
1. If 32°C
≦
T
≦
37.3°C(89.6°F
≦
T
≦
99.2°F), the green light will last for 3
seconds, with one long beep.
Switching Between Mute and Un-Mute
When the thermometer is turned on, keep pressing
the Memory/Mute-unmute button for 2-3 seconds,
to switch from un-mute to mute.
Recall 35 Sets of Memory Data
If there is no value saved, it will display “---M”.
Press the
Memory/Mute-unmute button
to go to the memory mode.
Press this button again to check the 35 sets of memories one by one.
version
Open the ba ery cover, use the toggle switch to chang
.