Ceiling and wall attachment
Dr. Mach
Lamps and Engineering
4.3 Installing the extension arm stop
(surcharge)
Note:
The stop is supplied with a plastic cover with
cut-out.
The upper plastic cover of the wall bearing is no
longer required and may be discarded
•
Remove and discard the upper plastic cover
1
of the wall bearing.
•
Insert the
extension arm stop
2
into the two
grooves
3
of the wall bearing as shown in the
figure.
•
Check the
extension arm stop 2
for firm seat-
ing.
•
Install and engage the supplied
plastic cover
with cut-out 4
.
•
Check the
plastic cover with cut-out 4
for firm
seating.
•
The mounted
extension arm stop
protects the
lamp from damages caused by accidental tou-
ching of the wall.
1
3
4
2
3
59500001
Edition 06
11.03.2003 / Bak Page 19/48
