18
TTY Interface
8
The TTY interface is the NetGuardian LPG Controller's built-in interface for basic configuration. From the TTY
interface, you can:
·
Edit the IPA, subnet, and gateway
·
Set DCP info for T/Mon polling
·
Configure primary port
·
Ping other devices on the network
·
Set unit back to factory defaults
·
Debug and troubleshoot
For more advanced configuration tools, please use the Web Browser Interface.
For Telnet, connect to the IP address at port 2002 to access the configuration menus after initial LAN/WAN setup.
Telnet sessions are established at port 2002, not the standard Telnet port
as an added security measure.
If you're using Windows 7, then you'll need to install telnet before you can use the TTY interface. To install telnet,
open up your command line (type "cmd" into the search bar in the
Start Menu
). Select
cmd.exe
to run the
command line.
From the command line, type in
pkgmgr /iu:"TelnetClient"
then press
enter
. When the command prompt
appears again, the installation is complete.
Menu Shortcut Keys
The letters before or enclosed in parentheses () are menu shortcut keys. Press the shortcut key to access that
option. Pressing the ESC key will always bring you back to the previous level. Entries are not case sensitive.
Содержание NetGuardian LPG D-PK-NGLPG
Страница 74: ...70 AState 6 For specific alarm points see Table B6...
Страница 79: ...75...
