DPS Telecom NetGuardian LPG D-PK-NGLPG, Руководство пользователя

Страница: 21 / 82

17
...via LAN 7.2
NetGuardian LPG Controller Ethernet Port
To connect to the NetGuardian LPG Controller via LAN, all you need is the unit's IP address (Default IP
address is 192.168.1.100).
If you DON'T have LAN, but DO have physical access to the NetGuardian LPG Controller, connect using a
LAN crossover cable. NOTE: Newer PCs should be able to use a standard straight-through LAN cable and handle
the crossover for you. To do this, you will temporarily change your PC's IP address and subnet mask to match the
NetGuardian LPG Controller's factory default IP settings. Follow these steps:
1. Get a LAN crossover cable and plug it directly into the NetGuardian LPG Controller's LAN port.
2. Look up your PC's current IP address and subnet mask, and write this information down.
3. Reset your PC's IP address to 192.168.1.200 . Contact your IT department if you are unsure how to do this.
4. Reset your PC's subnet mask to 255.255.0.0 . You may have to reboot your PC to apply your changes.
5. Once the IP address and subnet mask of your computer coincide with the unit, you can access the unit via
a Telnet session or via Web browser by using the unit's default IP address of
192.168.1.100 .
6. Provision the NetGuardian LPG Controller with the appropriate information, then change your computer's
IP address and subnet mask back to their original settings.
Now you're ready to do the rest of your configuration via LAN. Plug your LAN cable into the NetGuardian LPG
Controller and see "Logging On to the NetGuardian LPG Controller" to continue databasing using the Web Browser.