DP Pumps Hydro-Unit Premium Line F, Инструкция по установке и эксплуатации

Страница: 34 / 64

34 / 64
Main menu Key Sub-menu Menu display
➡ Settings ➡ Time/date
➡ Program outputs
➡ Messages
➡ Main menu
➡ Information ➡ Control module Serial number
Material number
Firmware
Parameter set
Hardware version
7.1.3 Access levels
Various access levels have been defined to prevent unintentional or unauthorised access to
the pressure booster system parameters.
"Standard" level
Unless users log on to one of the other access levels, they will only have limited access to
parameters.
"Customer" level
Access level for expert users.
This level enables access to all the parameters required for commissioning. You must enter
the password under (3-2-1-1) Login to gain access.
"C" is displayed.
If password protection is deactivated via parameter 3-2-1-2, this access level becomes the
"Standard" access level.
The password is "7353".
"Service" level
Access level for service personnel.
You must enter the password under (3-2-1-1) Login to gain access.
"S" is displayed.
"Factory" level
Access level for the manufacturer only.
"F" is displayed.
NOTE
If no keys are pressed for ten minutes, the system will automatically return to
the "Standard" access level.
7.1.4 Displaying and changing parameters
The parameter numbers identify the navigation path, which helps you find a particular
parameter quickly and easily.
The first digit of the parameter number indicates the first menu level, which is called up
directly via the four function keys.
Table 15: Function key assignment
Key Menu
Operation
Diagnosis
Settings
Information
Subsequent steps are carried out via the navigation keys.
Example: parameter 3-5-1 Setpoint
First, enter the customer password. [
ð
Section 7.1.3, Page 34]
Then change the setpoint as follows: