PRELIMINARY INSTRUCTIONS
Read all these instructions
• FIRE:
CAUTION:
Consult the safety data sheet for the ink to determine whether your printer uses
INFLAMMABLE inks and additives.
If this is the case:
– Place a foam, CO
2
or powder extinguisher close to the printer (maximum 10 metres).
– The printer must be kept in a well aired place away from sources of heat, flames or
sparks.
– Never leave ink, additive or cleaning solution cans or cloths soaked in ink near the
printer.
– Never smoke near the printer. Display a notice with "NO SMOKING,
INFLAMMABLE INK" close to the printer.
– Make sure to keep the printer very clean, as a dry ink deposit is highly inflammable.
– The ink, additive and cleaning solution cans must be closed and stored in a well
aired room.
• ELECTRICAL CONNECTION:
– The connection to the single phase electricity supply network must use a standard
3 pin plug with earth ; this plug must be easy to access.
– The earth connection must comply with applicable regulations.
• HEALTH:
– It is strictly forbidden to wear contact lenses when handling consumable products.
– It is recommended that ink-resistant gloves and safety goggles should be worm
during filling and cleaning operations.
Disconnect the printer from the mains power supply before any intervention.
IMAJE cannot be in any way held responsible should the above-mentioned rules not be
respected, and in general for the non-respect of elementary safety rules concerning the
utilization of these machines.
All modifications without written authorization from imaje are prohibited and
their possible consequences are the responsability of the person who performed
them.
The same applies for any use of the printer which does not comply with the
printer’s specifications.
A13862 Version E
Page 1-1
