Douwe Egberts Cafitesse 400 Скачать руководство пользователя страница 42

Страница: 42 / 43

01.2003

Series 03

Trouble shooting

REMEDY

- Check the power supply plug, fuse or fault current

safety switch.

- Press the ON/OFF button.
- Turn the key switch to the neutral position.

- Increase credit on card or insert enough money.
- Inform service technician.

- Insert the flexipack properly or replace it.
- Position the dosing tube properly.

- Replace the flexipack, switch the dispenser off and

on if necessary.

- Check whether the water cock is completely open.

Pull  out  the  power  supply  plug  and  plug  it  in  once
again  after  approx.  2  -  3  sec.  Call  a  Service
Technician  if  the  fault  could  not  be  cleared.

- The dispenser is ready for operation when the

cleaning process is completed and the correct
cooling compartment temperature has been
reached.

- Wait until the temperature has been reached, then

the fault will be cleared automatically.

- Close the cooling compartment cover.
- Check the distance to the wall (min. 50 mm).

Check whether the air supply is sufficient.

- Call a Service Technician.

FAULT/DISPLAY

Dispenser does not work
a) no deliveries/no indica-

tions

b) no deliveries/indications

c) no beverage delivery

when connected to a
payment system

Only delivery of water

No deliveries
"Empty" indicator lights up

ERR5 is displayed on
the service panel

Code 8 is displayed on
the service panel

CAUSE

- Power supply interrupted (power supply plug,

fuse, fault current safety switch).

- Dispenser not switched on (ON/OFF button).
- Key switch not in neutral position.

- Not enough credit on the card or too little

money inserted.

- Payment system is defective

- Flexipack inserted improperly.
- Dosing tube positioned improperly in the slotted

hole of the pack.

- Flexipack empty.

- Not enough water in the boiler or water level

reached too late.

- The cooling compartment is just being cleaned.

- Temperature too high because flexipack has

not been stored in a refrigerator.

- Cooling compartment cover not closed.
- Dispenser installed too near to the wall.

- Air channel, blower or air filter dirty / defective.

Содержание Cafitesse 400












































Результаты поиска

Содержание Cafitesse 400

Отзывы:

Похожие инструкции для Cafitesse 400

Бренды по названию

Популярные бренды

Douwe Egberts Cafitesse 400, Руководство по эксплуатации

Результаты поиска

Содержание Cafitesse 400

Отзывы:

Похожие инструкции для Cafitesse 400

Бренды по названию

Популярные бренды