Douwe Egberts Cafitesse 400 Скачать руководство пользователя страница 38

Страница: 38 / 43

01.2003

Series 03

Cleaning and maintenance

CLEANING THE WATER TANK (OPTION)

The water tank must never be
subjected directly to sunlight.

The  kit  water  tank  must  only  be
applied  as  a  temporary  and  not
as  a  permanent  installation.

The water tank must be filled
with new drinking water every
day.

The pumps in the tank must
always be covered with water.

•

Switch off the device by means of the
main switch.

•

Unscrew the closure of the water tank.
(Fig. 61)

•

Remove the pump unit (1). (Fig. 62)

•

Clean the pump unit by means of a
soft brush and rinse it several times.

•

Empty  the  water  tank,  rinse  it  twice
with  hot  drinking  water  and  fill  it  with
drinking  water.  (19 l)

Fill  the  tank  with  cold  drinking
water  only  (max.  30°C).
Observe  local  regulations
regarding  the  drinking  water
quality.

•

Insert the pump unit into the water
tank and close it with the closure.

Make sure that the hoses are not
bent.

•

Switch on the device and check the
correct functioning.

Содержание Cafitesse 400












































Результаты поиска

Содержание Cafitesse 400

Отзывы:

Похожие инструкции для Cafitesse 400

Бренды по названию

Популярные бренды

Douwe Egberts Cafitesse 400, Руководство по эксплуатации

Результаты поиска

Содержание Cafitesse 400

Отзывы:

Похожие инструкции для Cafitesse 400

Бренды по названию

Популярные бренды