Douglas Dynamics SnowEx Liqui Maxx Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 40

Douglas Dynamics SnowEx Liqui Maxx Скачать руководство пользователя страница 14

Lit. No. 76348, Rev. 01

14

May 15, 2017

Console Mount Kit

Illustration 1

INSTALLATION

Mounting the Display Console & Switches

Select a mounting location that is convenient to reach

and highly visible to the operator. Do not install in a

position that obstructs the view of the road or work

area. Whenever possible, avoid locations that expose

the console to direct sunlight, high temperature,

strong chemicals, or rain.

Place the mounting bracket in the selected location,

mark holes, drill 1/4" (7 mm) holes and mount bracket

with bolts, lock washers, and nuts provided. (Use self-

tapping screws if not practical to use bolts.)

See Illustration 1.

Put rubber washers on carriage bolts and put the

bolts through the bracket holes from the inside out.

Place console over carriage bolt heads.

Install the switch brackets over the carriage bolts

and alongside the console bracket. Install the mount

knobs on the carriage bolts and tighten to secure the

console and switch brackets in place.

See Illustrations 2 & 3.

Install the switches in the brackets, making sure that

the "ON" position is oriented up. Attach the quick

disconnects on the switch harnesses to the switches

(see wiring diagram). Then install the switch harness

connectors into the mating connectors on the console

harness. Typically the power ON/OFF switch is

mounted on the left and the RUN/HOLD switch is

mounted on the right.

Drill 1/4" (7 mm)

holes for bolts,

or 3/16" (5 mm)

holes for self-

tapping screws.

Bolts

Lock Washers

and Nuts

Console ON/OFF Switch

Illustration 2

Console RUN/HOLD Switch

Illustration 3

INSTALLATION INSTRUCTIONS

«
...
12
13
14
15
16
...
»

Содержание SnowEx Liqui Maxx









































Отзывы:

Нет отзывов