Douglas Dynamics SnowEx Liqui Maxx, Руководство пользователя и инструкции по установке, Страница: 10 / 40

Lit. No. 76348, Rev. 01 10 May 15, 2017
2. Connect the hose underneath the unit: Securely
fasten the 90° elbow connection to the tank
bulkhead fitting underneath the unit. Make sure
the bulkhead fitting is securely fastened to the
tank to prevent leaks. Run the 2" hose from the
elbow to the shut-off valve below the pump. Clock
the 90° elbow so that the hose remains free
of kinks; cut it to length. Clamp the hose using
two (2) clamps on each end to prevent leaks. In
low temperatures, warming the hose may ease
installation. Dip the hose in hot water or carefully
use a heat gun for 20–40 seconds.
3. Connect the return valve to the 2" bulkhead
connection on the pump side of the brine tank.
Securely fasten the 45° connections to the tank
bulkhead fitting and the return valve. Make sure
the bulkhead fitting is securely fastened to the
tank to prevent leaks. Clock the 45° connections
so that the hose remains free of kinks, and cut
the 1-1/2" hose to length. Clamp the hose using
two (2) clamps on each end to prevent leaks.
4. Connect the bypass line to the 3/4" bulkhead
connection on the pump side of the brine tank.
Securely fasten the 90° elbow to the tank
bulkhead fitting. Make sure the bulkhead fitting
is securely fastened to the tank to prevent leaks.
Clock the 90° elbow so that the hose remains free
of kinks, and cut the 1/2" hose to length. Clamp
the hose tightly to prevent leaks.
INSTALLATION AND REMOVAL
NOTE: To prevent leaks, use a thread sealing
compound on all threaded connections. Do
not use Teflon
®
tape, as fragments will clog the
spray nozzles. Clamped connections may require
periodic retightening.
1. Bolt the pump and tank platforms together
(6 places).
INSTALLATION INSTRUCTIONS
Teflon
®
is a registered trademark of E. I. du Pont de Nemours and Company.
WARNING
Always shut off vehicle before attempting to
attach, detach, or service spray system.
WARNING
Never attempt to take a unit off a truck with
liquid in it.
Shut-Off Valve
90° Elbow
WARNING
Overloading could result in an
accident or damage. Do not exceed
GVWR or GAWR ratings as found
on the driver-side vehicle door
cornerpost. See specifications to determine
maximum volumes of spraying material.
WARNING
New untitled vehicle installation of a sprayer
system requires National Highway Traffic
Safety Administration altered vehicle
certification labeling. Installer to verify that
full sprayer does not exceed GVWR or GAWR
rating label and complies with FMVSS.