dotykacka DOTPO01501, Быстрое руководство

Страница: 52 / 121

V
52
en
Cash register connection
1. Unpack the cash register and place it on the table at the back side of the
stand. Tilt it so you can see the covered panel with connectors at the bottom
side. Now remove the cover.
2. Plug the USB printer cable (or also the bar code reader) into any of USB
ports (7) . You can use any USB port, except the red labeled port.
3. the printer. Some drawer types do not have the cable firmly connected,
so you have to connect it both to the printer and the drawer. Find the co-
nnection plug (usually on the bottom or back side of the drawer).
4. Now connect the power adapter to the printer, plug it into the socket
and turn the printer on.
5. If you have an Ethernet cable available for the Internet connection, plug it
into the network connector WLAN (8) .
6. Plug the power adapter connector in the
(1)
, socket and then plug the power
cable into the socket.
7. Put the cover on the panel with connectors, under which you pull the cables
through. Put the cash register up.
8. Use the button at the back side to switch the cash register on. Your touch
cash register is now ready for operation.
Panel with connectors
Power supply
Connecting the cash register driver (actually not supported – the cash register
drawer is connected to the printer)
Sound input
Sound output
SIM card slot (actually not supported – the cash register supports Wi-Fi
or Ethernet WLAN)
Micro SD card slot
USB ports (lower right USB OTG)
Ethernet WLAN (1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)