Dot Hill Systems SANnet II 200, Инструкция по установке, эксплуатации и обслуживанию

Страница: 141 / 186

Appendix E Configuring a Solaris Server E-5
1. Edit the
/kernel/drv/qus.conf
or
/kernel/drv/glm.conf
file (whichever is
appropriate to your HBA) to add more targets and LUNs (up to 32 LUNs per logical
drive, and a maximum of 128 LUNs per SANnet II 200 array).
Note –
If the file does not exist, create it using the format in the example below.
Allow five blank spaces between “Dot Hill” and “SANnet II 200” on the first line.
An example of text to add to
/kernel/drv/qus.conf
or
/kernel/drv/glm.conf
is:
Caution –
Do not edit the
/etc/system
file to accomplish the same purpose. While
this can have the desired effect, it can also cause interference with other storage
devices attached to the same host.
2. Reboot the host to implement the file changes.
The Solaris 8 OS requires a reconfiguration reboot to create device files and implement
sd.conf
changes but you do not need a reconfiguration reboot for the Solaris 9 or 10
OS.
For the Solaris 9 or 10 OS, use the following commands to create device files after you
have edited
sd.conf
. No reboot is necessary with this command:
The new LUNs are displayed when you perform the
format
command.
3. To display the new LUNs, perform the following command:
device-type-scsi-options-list = “Dot Hill SANnet II
200”,
“SANnet II 200-scsi-options”;
SANnet II 200-scsi-options = 0x43ff8;
reboot -- -r
update_drv -f sd
devfsadm
format