Dorner 62M005ESBDDEN, Инструкция по установке, эксплуатации и запасным частям

Страница: 8 / 20

Dorner Mfg. Corp. 8 851-738 Rev. A
Brushless DC Motor Control
Installation
For 1 Phase (115 Volt) Controllers:
1. Open controller by loosening four plastic cover screws
(Figure 8, item 1) , and removing controller case cover
(Figure 8, item 2) .
Figure 8
Figure 8
2. Remove controller cover (Figure 9, item 1) .
Figure 9
Figure 9
3. Connect black (live side) (Figure 9, item 2) to L
(Figure 9, item 3) and white (neutral side) (Figure
9, item 4) to N (Figure 9, item 5) wires on controller.
4. Connect motor plugs (Figure 10, item 1) and (Figure
10, item 2) .
Figure 10
Figure 10
DANGER
SEVERE HAZARD!
Hazardous voltage will cause severe injury
or death. LOCKOUT POWER BEFORE
WIRING.
NOTE
For 115V controllers no wiring is required.
Controller is provided with power cord. The
steps 1-3 are shown for reference, only if re-
wiring is required.
1
2
3
2
5
4
1
2
1