Dorner 62M005ESBDDEN, Инструкция по установке, эксплуатации и запасным частям

Страница: 16 / 20

Dorner Mfg. Corp. 16 851-738 Rev. A
Brushless DC Motor Control
Operation
2. Press MODE to switch to the data setting mode. The
PRGM LED
(Figure 34, item 1) will illuminate and
“SPd” (Figure 34, item 2) will be displayed.
Figure 34
Figure 34
3. Press up (Figure 35, item 1) to select “Gr-r” (Figure
35, item 2) (gear ratio), and then press SET (Figure
35, item 3) .
Figure 35
Figure 35
4. Press up or down (Figure 36, item 1) to select the speed
display mode “cv” (Figure 36, item 2) , and then press
SET (Figure 36, item 3) :
Figure 36
Figure 36
• cv: Conveyor transfer speed display (the m/min LED will
illuminate).
5. Press up or down (Figure 37, item 1) to change the
conveyor gear ratio (e.g., 100 (Figure 37, item 2) ).
Pressing and holding the key for 3 seconds or more will
increase or decrease the value successively.
Figure 37
Figure 37
6. After the gear ratio has been changed, press SET (Figure
37, item 3) to confirm the new setting.
7. Press MODE to switch to the monitor mode. The r/min
LED or m/min LED will illuminate according to the
specified display mode.
PRGM
2
1
1
2
3
2
3
1
2
3
1