Dorner 62M005ESBDDEN, Инструкция по установке, эксплуатации и запасным частям

Страница: 14 / 20

Dorner Mfg. Corp. 14 851-738 Rev. A
Brushless DC Motor Control
Operation
4. Press up or down (Figure 27, item 1) to change the
speed (e.g., 1000 r/min) (Figure 27, item 2) . Pressing
and holding the key for 3 seconds or more will increase
or decrease the value successively.
Figure 27
Figure 27
5. After the speed has been changed, press SET (Figure
28, item 1) to confirm the new setting. The display will
blink and show “Acc1” (Figure 28, item 2) , after which
the acceleration time (Figure 28, item 3) will be
displayed
Figure 28
Figure 28
6. Press up or down (Figure 29, item 1) to change the
acceleration time (e.g., 5.0) (Figure 29, item 2) .
Pressing and holding the key for 3 seconds or more will
increase or decrease the value successively
Figure 29
Figure 29
7. After the acceleration time has been changed, press SET
(Figure 30, item 1) to confirm the new setting. The
display will blink and show “dEc1” (Figure 30, item 2) ,
after which the deceleration time (Figure 30, item 3)
will be displayed.
Figure 30
Figure 30
8. Press up or down (Figure 31, item 1) to change the
deceleration time (e.g., 5.0) (Figure 31, item 2) .
Pressing and holding the key for 3 seconds or more will
increase or decrease the value successively.
Figure 31
Figure 31
9. After the deceleration time has been changed, press SET
(Figure 32, item 1) to confirm the new setting. The
display will blink.
Figure 32
Figure 32
10. Press MODE to switch to the monitor mode.
NOTE
Minimum Speed = 100 rpm
Maximum Speed = 3000 rpm
1
2
1 second
later
1
2
3
1
2
1 second
later
1
2
3
1
2
1