Dorner 62M005ESBDDEN, Инструкция по установке, эксплуатации и запасным частям

Страница: 17 / 20

851-738 Rev. A 17 Dorner Mfg. Corp.
Brushless DC Motor Control
Operation
Setting Speed While Motor is Running
1. While the motor is running, press MODE (Figure
38, item 1) with the display showing the speed (e.g.,
1000 r/min) (Figure 38, item 2) . The MNTR LED
(Figure 38, item 3) will blink.
Figure 38
Figure 38
2. Press up or down (Figure 39, item 1) to change motor
speed and set operation data to write the current speed to
(e.g., SPd1)
(Figure 39, item 2) .
Figure 39
Figure 39
3. Press SET (Figure 40, item 1) . The new speed will be
set to the operation data digitally.
Figure 40
Figure 40
Switching the Signal Method to Remote
Signal (If Required)
1. Turn on the power.
2. Set the operation method to “Remote”.
The initial setting is “Lo” (digital operator).
a. Press MODE to switch to the digital operator/external
input signal setting mode. The LO/RE LED
(Figure
41, item 1) will illuminate.
Figure 41
Figure 41
b. Press up or down (Figure 41, item 2) select to select
“RE” (remote operator).
c. Press SET (Figure 41, item 3) to confirm the selection.
The display will blink.
1
MNTR
2
1
3
4
1
1
1
2
1
LO/RE
3
1
2