4.5.2.9 Wireless
Further information about wireless can be found in the PG wireless manual.
This menu offers the following options:
•
Connect
the component to the network
•
Disconnect
the component from the network
•
Display the
status
of the component in a network
Procedure for connecting a component to a wireless network
Requirements
•
Component with E320, 321, 340, 341, 360, 361
•
Configured wireless gateway
•
Master medium of the site
Configuring the wireless menu
1.
Open the 'Settings' menu.
2.
Open the 'Actuator' menu.
3.
Log the master medium in to the actuator.
4.
Connect the programmer to the actuator.
5.
Select the 'Wireless' sub-menu.
6.
Press the ENTER key.
The following options are available in the 'Wireless' menu:
•
Connect
to the network
•
Disconnect
from the network
•
Display
status
of the network
Procedure for connecting to the network
1.
Choose
Connect
.
2.
Confirm with ENTER.
ð
Search for network... (Network is searched for.)
ð
Gateway (GW) found.
ð
Connecting to the GW is executed.
ð
Putting into operation...
ð
Connected to GW.
ð
The linked actuator is connected to the network.
Procedure for disconnecting the network connection
1.
Choose
Disconnect
.
2.
Confirm with ENTER.
ð
The network is exited.
Procedure for displaying the network status
1.
Choose
Status
.
2.
Confirm with ENTER.
ð
The component status is displayed.
The programmer display contains the following:
SW
Software version, e.g. 00.0024
NW
Network, e.g. standalone or wireless
Operation
User Manual
24
- 06/2021
dormakaba Programmer 1460
