1.
Select the menu ‘PIN Protection’.
2.
Select the menu ‘Change PIN’.
3.
Input the old PIN.
4.
Input the new PIN twice.
ð
If the inputs (old PIN, the new PIN twice) are not correct, the PIN is not changed.
Deleting the PIN and the locking plans on the Programmer:
Deleted key plans cannot be restored.
•
Re-import the key plans.
1.
Select the menu ‘Delete PIN’.
ð
A confirmatory warning is displayed, asking whether the PIN and the locking plans on
the Programmer should be deleted.
2.
Select ‘Yes’.
ð
The PIN and the locking plans are deleted on the Programmer.
4.5.1.11 Comfort update
In these settings, the programmer’s behaviour during a comfort update is determined.
In the 'Configuration' menu, you can select whether the configuration saved in the
component or in the programmer should be preferred during a firmware update.
In the 'Traceback' menu, you can select whether the traceback of the component should be
downloaded.
'Configuration' menu
1.
Open the 'Settings' menu.
2.
Open the 'Programmer' menu.
3.
Open the 'Comfort update' menu.
4.
Select the 'Configuration' sub-menu.
Select
The user decides whether the existing configuration of a component
should be preferred over a configuration saved in the programmer.
Prefer internal
The configuration of the component saved in the programmer is pre-
ferred.
Prefer existing
The configuration saved in the component is preferred.
'Traceback' menu
1.
Open the 'Settings' menu.
2.
Open the 'Programmer' menu.
3.
Open the 'Comfort update' menu.
4.
Select the 'Traceback' sub-menu.
Select
The user chooses for this firmware update.
Prefer internal
The component traceback data saved in the programmer are pre-
ferred.
Prefer existing
The traceback data saved in the component are preferred.
Do not read
The traceback data are not read and are lost during update.
4.5.2 Actuator settings
Valid master media are required for some settings.
Operation
User Manual
19
- 06/2021
dormakaba Programmer 1460
