a) The
LED trigger
buttons opens the
LED trigger options
window. In this window, the
Triggered By Acquisi-
tion
option is available; other options are still in beta, and will be made available at a later date. Sequences
can be activated/shut down while this window is open.
• The
LED Trigged by acquisition
(Fig.
) mode activates the LED when an acquisition sequence is
started. This includes the moment the
Headstage
is initially activated, and when a recording session is
started using one of the
Ephys Trigger Options
.
b) The
Nickname
box allows the user to change the name used for the connected headstage.
c) The
Unique ID
box displays the unique ID sequence associated with the headstage currently in use.
d) The
Version
box displays the headstage firmware version.
e) The
Channel
drop-down list shows the channel currently in use by the headstage. When using two head-
stages, the channel must be different for each headstage.
f) The
Pair
button is used to pair an active headstage to a console. When a headstage is paired, it becomes the
Unpair
button, which unpairs the active headstage associated with the given antenna.
g) The
Battery Level
bar displays the headstage battery level, in %, at all times.
h) The
Signal strength
bar displays the signal strength. If the signal strength is acceptable (100-76%) the bar
appears
blue
. If the signal strength is low (75-50%), it will appear
yellow
. If the signal strength is critically low
(
<
50%), it will appear
red
.
i) The
Status
bar displays acquisition status.
STOPPED
is displayed when the acquisition is inactive, and
STARTED
when acquisition is active.
2. The
Electrode Traces
(Fig.
) displays the signal detected by the cannula electrodes, in numbered order.
3. The
LED Trace
(Fig.
) displays the current being sent to the cannula LED.
Chapter 3. Doric Neuroscience Studio
16
