(a)
Channel configuration window setup
(b)
Acquisition setup
Figure 2.4:
Headstage startup elements
2.1.3 Fiberless & Wireless Headstage Setup
The
Fiberless and Wireless Headstage
is the bridge between the
Fi-Wi Opto-electric Cannula
and the
Electrophysiology Con-
sole
. Some preparation is required for optimal use.
Figure 2.5:
Headstage charger installation
1. The
Fiberless and Wireless Headstage
must first be charged. Place a headstage onto the
USB Charger
so the antenna
is on the position indicator.
• The console must be
ON
for the headstage to recharge, which requires
>
60 min.
• The headstage cannot connect wirelessly while being charged.
• While recharging, the
Status Lights
of each
docking port
are yellow. These turn green once the headstage
has sufficient charge to be used, which will typically take approximately an hour.
2. Remove a headstage from the
USB Charger
.
3. Click the
Pair
button in the
Wireless Settings
. Once properly paired, the section will display the
Headstage ID
,
the
Battery Level
and the
Signal Strength
.
Chapter 2. Operations Guide
10
