46
45
Place booster seat in the
back seat of vehicle
making sure the back of
the booster seat is
resting firmly on the
back of the vehicle’s
bench. Booster seat
faces the front of the
vehicle. Place the child’s
bottom and back flat
against the booster seat.
This will allow the vehicle belt to be properly
tightened.
Place the shoulder belt
across the child’s chest
and lap belt on the
child’s thighs as shown.
Buckle.
Note:
The shoulder belt
should be over the
child’s shoulder (not
across the face or neck)
and across the child’s
chest.The lap belt should
remain on the child’s upper thighs (not on the
stomach).Always verify that the child has not moved
out of position and loosened the shoulder belt.
4
Use the booster seat in
the upright position
only. Reach under the
seat and rotate the
recline stand down.
Push up firmly until it
locks in place.
2
3
WARNING
!
Do not use this booster seat if the
midpoint of your child’s ears is above the
top of the booster seat’s headrest.
Belt-P
ositioning Booster Seat Installation:
18-36 kg (40-80 lb
.),
102-132 cm (40-52 in.)
Belt-Positioning Booster Seat
Installation
Note:
For belt-positioning booster seat use, you MUST
remove harness system (see “Removing Harness System”
section).
•
You MUST remove base (see “Removing Base”
section).
•
Do Not use tether strap (See “Storing Tether
Strap” in the “Adjusting the Tether Strap” section).
•
Do not use the level to ground line on the
shoulder belt positioning guide in the forward-
facing position.
•
Check vehicle owner’s manual for seat belt use with
a booster seat.
Lap/Shoulder Belt
When UAS is not in
use, fasten UAS hooks
behind the child
restraint as shown.
1
continued on next page.
4358-3434D Canada Elite Eng 3/17/08 9:05 AM Page 51
