44
43
To remove the UAS belt
push down on UAS belt
adjuster button to
loosen belt. Unhook
UAS from bar.
9
With one hand at belt
path push and pull the
child restraint from side
to side, forward and
back. If vehicle belt does
not loosen the child
restraint should be
secure.
If UAS belt loosens,
repeat all steps. Check
your vehicle owner’s
manual or call DJG
Consumer Relations for
help.
8
WARNING
!
UAS belt must be securely fastened.
Loose UAS belt could cause serious injury
or death to the child.
Forwar
d-Facing Child Restraint Installation with U
AS Belt:
10-18 kg (22-40 lb
.),
74-102 cm (29-40 in.)
6
Place one knee in the
child restraint and push
down while pulling on the
loose end of UAS belt to
tighten.
Fasten tether hook to the
tether anchor in your
vehicle and pull on loose
end to tighten. (See
“Adjusting the Tether
Strap” section.)
7
WARNING
!
Tether straps are required in Canada.
Using this child restraint without the
tether strap anchored as recommended by
the manufacturer would be a misuse of the
child restraint and in a sudden stop or
crash could cause serious injury or death.
WARNING
!
Do not fasten both UAS hooks on the same
UAS anchor bracket/bar in the vehicle.
Do not use UAS belt with the vehicle seat
belt.
4358-3434D Canada Elite Eng 3/17/08 9:05 AM Page 49
