Dong Jin DCS - Series, Руководство по эксплуатации

Страница: 22 / 45

22
(7) Vise Pressure Adjustment
Fig.10
You can adjust vise pressure by turning the knob of reducing valve(OG-
G01-P1), which is pressure control valve. The reducing valve is under right
the solenoid valve(SS-G01-E3X-C1) on the hydraulic unit at the backside of
machine. Turn clockwise, the pressure goes up; turn anticlockwise, the
pressure goes down. While watching the pressure gauge, please set the
value of pressure. We strongly recommend that Vise pressure should be
between 26~27kgf/
㎠
which is 3~4 kgf/
㎠
lower than the main pressure
setting value.(30kgf/
㎠
)
WARNING
If this pressure valve is not proper, the saw head does not move
down and vise can not be closed.