Dong Jin DCS - Series Скачать руководство пользователя

Страница: 2 / 45

Please read the safety instruction carefully!

Before installation, operation and maintenance of the

machine, please read the next page Description of
Safety Precautions and Warning Signs carefully.

You should not try to install or operate this machine

until you have read this manual carefully and
understood its whole content. Otherwise, injuries and
damages might be caused by so doing.

Operators have to endure trainings of safety and

machine operations. After certified and authorized by
the employer, they can thus be allowed to operate the
machine.

If machine is treated improperly or safety regulations

are ignored, injuries and damages will be caused by so
doing.

Please contact us, once questions regarding this

manual or safety regulations arise.

This manual is deemed as an important document

attached to this machine. Please hand it over to the next
owner when the machine’s ownership is changed or
transferred.

Содержание DCS - Series














































Результаты поиска

Содержание DCS - Series

Отзывы:

Похожие инструкции для DCS - Series

Бренды по названию

Популярные бренды

Dong Jin DCS - Series, Руководство по эксплуатации

Результаты поиска

Содержание DCS - Series

Отзывы:

Похожие инструкции для DCS - Series

Бренды по названию

Популярные бренды