Donaldson Torit RP Baghouse, Инструкция по установке и эксплуатации

Страница: 6 / 48

6
Donaldson Company, Inc.
The Rugged Pleat (RP) Baghouse is a continuous duty dust collector with pleated filters designed to handle applications with
heavy dust loads. Continuous-duty means the filters can be pulse cleaned on-line without interrupting airflow through the collector.
The cleaning system logic monitors the arm location and ensures pulses are delivered directly on the centerline of filters to
optimize cleaning with all filters being cleaned every four minutes.
The cylindrical collector housing design features an all-welded construction in standard sizes from 70 to 272 filter with 60-inch
pleated bags available in various media types. The collector housing design can include a SuperSep™ low body inlet or an upper
body radial high inlet with replaceable wear inserts.
The SuperSep™ inlets are typically used for heavy non-abrasive dust handling applications. These inlet styles allow the majority
of the incoming dust to cyclonically separate. The heavier dust is directed downward into the hopper while the lighter dust is
passed through air straightening vanes to evenly distribute the air and entrained dusts over the filters for final separation.
The upper body radial style high inlet is typically used on highly abrasive dust type applications. This style of inlet is located in
the filter housing section below the tubesheet and directs the incoming dust particles into a replaceable impaction zone then
downward around the filters and into the hopper. This flow path reduces abrasion and assists the cleaning system by supporting
an airflow pattern that encourages the dislodged dust pulsed off the filters to move downward into the hopper. Baffles in the inlet
keep dusts from directly abrading on the filter bodies.
RP Baghouses come standard with a walk-in Clean-Air Plenum (CAP). Filters, pulse and drive components can be serviced on
the clean air side of the collector within the walk-in plenum. Access to the Clean Air Plenum is provided by an optional ladder and
platform system.
The RP Baghouse collector is ideal for applications in the woodworking, grain and mining industries where it effectively handles
high-volume, high dust-load applications. Additional applications include cement, chemical and food processing applications.
The RP Baghouse is typically used in applications between 10,000-55,000 cfm.
Sizes are available for lower airflow applications with any of the following conditions or requirements:
• Heavy dust load
• No compressed air available
• A round collector required for sanitary reasons
• High pressure or vacuum requirement
• A requirement for a single discharge hopper.
Operations involving higher temperatures, humidity, or air stream chemistry may require customized collector design options.
Contact Donaldson Torit for design assistance.
2 Product Description
Intended Use
Rating and Specification Information
General rating and specification information can be found in the product literature provided with the collector and is available on the
Donaldson website. For specific load values for a collector, see the Specification Control Drawing shipped with the collector.