Donaldson Torit RP Baghouse, Инструкция по установке и эксплуатации

Страница: 14 / 48

14
Donaldson Company, Inc.
Typical Collector Operation Sequence
Start-Up
Verify the process system is ready for operation and all alarm conditions are cleared prior to starting the collector.
1. Start waste dust systems.
a. Pneumatic conveying, compactor, RAL or screw conveyor
b. Look for upset conditions upon start/waiting to clear/monitor for dust accumulation
2. Start pulse system.
a. Cleaning arm drive
b. Pulse logic
c. PD pump
3. Start main blower.
Shut-Down
1. Shut off main blower.
Slowly ramping down airflow will allow accumulated dust to drop into the hopper gradually while the
collector continues cleaning. An abrupt reduction in airflow may result in one large release of dust from
the filters which may plug the hopper discharge.
2. Stop pulse system (pulse with no airflow for a short period of time in order to get better dust discharge and to reduce dust
buildup prior to restarting system).
3. Stop waste dust system once system is clear (continue running until no additional material discharge is noted).
*Reference control panel IOM for control specific startup instructions.
*