Donaldson Company, Inc.
7
First-Stage Filter
First-Stage Filter Replacement
first-stage filter
third-stage filter
cartridge with
second-stage
filter wrap
1.
Remove the filter cartridge by pulling the filter retention lever
out and down to a horizontal position. Remove filter cartridge
from collector.
2.
Pull wrap from filter cartridge and dispose of properly.
3. Install new wrap aligning the top of the wrap to the top of the
cartridge. Fasten securely with hook and loop fastener.
4.
Replace filter cartridge and secure with filter retention
mechanism.
Do not operate the collector without the second-stage filter wrap installed. Significant reduction in filter
cartirdge life may result.
1.
Remove first-stage filer by sliding it out along the guide rails.
2.
Properly dispose of first-stage filter.
3.
Replace first-stage filter by sliding it in along guide rails until
filter stops.
Second-Stage Filter and Wrap
Second- and Third-Stage Filter Replacement
third-stage filter
cartridge
filter retention
lever
second-stage
filter wrap
Third-Stage Filter Cartridge
Replace the second-stage filter wrap and third-stage filter cartridge at the same time for easy
maintenance.
1. Remove the filter cartridge by pulling the filter retention lever
out and down to a horizontal position. Remove filter cartridge
from collector.
A large plastic garbage bag placed over
the top of the used filter allows cleaner
filter change out. The filter can be tipped
forward and out of the collector while the
bag is pulled up over the bottom of the
cartridge.
2. Place new filter and wrap on the filter retention platform,
gasket side up. Slide filter back as far as it will go and center
side-to-side.
3. Lift the filter retention lever up and close access door.
