Cart Installation
inlet collar
hose clamp
flexible
duct
HEPA Filter
1.
Place HEPA filter inlet against frame with arrow pointing in
airflow direction.
2.
Secure HEPA filter to frame with latch.
Optional HEPA Filter
airflow
latch
frame
inlet
HEPA filter
arrow
7. Turn cart and collector assembly upright.
8. Thread the P-Trap assembly to the hopper drain. Stop when the P-Trap tailpiece is toward the back of the collector. See Flex-
Duct Positioning.
9. Remove cover from collection container and place container
under the collector’s hopper. Insert the P-Trap outlet into the
collection container.
10.
Apply sealant to one of the 6-in inlet collar flanges. Fasten to
hopper at the flex-duct location using the hardware supplied.
11.
Connect flex-duct to the collar and fasten with a hose clamp.
12.
Trim the flex-duct to length. Do not allow the flex-duct to sag.
Coolant can collect in sagging areas and re-entrain into the
system resulting in shortened filter life.
13. Prime the P-Trap by pouring a full cup coolant into the
hopper and allow it to settle in the P-Trap.
14.
To change from a front to a back flex-duct location, remove
the front access cover and reposition the collar and flex-duct
assembly. Apply sealant and attach the access cover to the
open hopper hole.
Dryflo, MMA and MMB
26
