Donaldson Torit DFE 2-4, Инструкция по установке и эксплуатации

Страница: 45 / 60

Downflo Evolution, DFE 2-8 to 5-80
A-4
• BIBO Bag - safely contains contaminants
collected from the filter cartridge in each access
port.
• Band Clamp - secures the BIBO bag and O-ring
to the collar.
• O-ring gaskets (front and back) - creates a seal
around the BIBO bag to secure the bag to the
collector.
• Breather Filter Assembly - provides a filtered
exhaust for removal of air as the BIBO bag is
compressed and stored in the BIBO collar.
• BIBO Support Shelf - provides support to the
filter during filter removal and installation and
holds hinged BIBO cover out of the way for filter
change.
Original Equipment Filter
To ensure performance levels, use only Donaldson Torit
replacement filters.
All filters must be removed and installed utilizing the
following BIBO procedure to maintain containment.
The following pre-installed items are located in each
filter access port to facilitate Bag-In/Bag-Out (BIBO)
replacement of the filter:
• Hinged BIBO Cover - provides a safety barrier to
contain BIBO bag inside the access port.
Clean Change BIBO Filter Service
BIBO Filter Removal and Installation
Use proper safety and protective
equipment when removing
contaminants and filters.
Dirty filters may be heavier than they appear.
Use care when removing filters to avoid
personal injury and/or property damage.
Turn power off and lock out electrical
power sources before performing service or
maintenance work.
Turn compressed air supply OFF, bleed and
lock out lines before performing service or
maintenance work.
Do not operate with missing or damaged filters.
BIBO Pre-Installed Items (Side View)
BIBO collar
buckle strap
yoke
*BIBO collar breather not shown
BIBO protective cover
hinged filter
access
cover knob
BIBO bag
front o-ring
band clamp
back o-ring