Donaldson Torit DFE 2-4, Инструкция по установке и эксплуатации

Страница: 47 / 60

Downflo Evolution, DFE 2-8 to 5-80
A-6
Clean Change Filter Removal
1. Starting at the top row of filters, securely position the
BIBO service shelf on the bracket attached to the
BIBO collar.
2. Remove the buckle strap and BIBO protective cover
from the collar and set aside.
3. Unroll the BIBO bag from inside of the collar out onto
the service shelf.
4. Toward the edge of the BIBO bag is the bag
extension to be used as a glove. Using the extension
as a glove reach into the bag and open the hinged
filter access cover by loosening the knob. Place
the filter access cover into the opening on the BIBO
service shelf to hold it securely out of the way during
filter change operations.
5. To remove the filter, using both hands, position the
end of the bag into the filter opening and pull the
filter cartridge out to the end of the bag, resting the
bag and cartridge on the end of the shelf.
6. Loosely reposition the access cover to the end of the
filter yoke.
Filter Removal and Installation
Use proper safety and protective
equipment when removing
contaminants and filters.
Dirty filters may be heavier than they appear.
Use care when removing filters to avoid
personal injury and/or property damage.
Turn power off and lock out all power before
performing service or maintenance work.
Turn compressed air supply OFF, bleed and
lock out lines before performing service or
maintenance work.
Do not operate with missing or damaged filters.
Ensure all pre-installed items are present,
undamaged and in the correct place
before proceeding with filter removal and
replacement. See BIBO Pre-Installed Items.
Failure to comply may result in containment
failure and lead to property damage and/or
personal injury.
Filter Removal
BIBO bag
cable ties with
1/2-in space
(typical)
BIBO service shelf band clamp BIBO collar
yoke
dirty filter
cut taped section
hinged filter
access cover
BIBO collar
breather