Donaldson Torit DFE 2-4, Инструкция по установке и эксплуатации

Страница: 51 / 60

Downflo Evolution, DFE 2-8 to 5-80
A-10
10. Install the filter with gasket end toward collector.
Using the BIBO bag as a glove, support the filter with
both hands while positioning the alignment features
and slide the gasket end of the new filter onto the
end of the suspension yoke.
Do not allow the bag to become
pinched between the access
cover and sealing surfaces. Failure to comply
may result in containment failure.
The filter shape and yoke work
together to ensure proper filter
alignment during filter installation. To assist
with alignment, an alignment mark (
r
)at the
top of the filter endcap (non-gasketed end)
must match with the alignment mark (
s
) at the
top of the filter access opening.
If knob fails to thread onto yoke, on the opposite
side of the hinge, apply slight pressure to the access
cover using other hand. Continue to turn knob to start
threading onto the yoke.
11. Close the filter access cover and tighten onto the
yoke.
12. Slowly roll bag back into the collar to allow air to
escape through the BIBO collar breather (see Bag
Setup).
13. Install the BIBO protective cover and secure with
buckle strap.
14. Turn electrical power and compressed air supply ON
before starting collector.
Bag Setup (Side View)
o-rings
band clamp
hinged filter access
cover knob
BIBO protective cover
buckle strap
bag stub