DOMUSA BioClass iC DX, Инструкция по установке и эксплуатации

Страница: 38 / 76

EN
38 BIOCLASS iC DX
For the other time programmings, directly access the process for setting the activation and deactivation
time periods for the selected function:
Select the time periods (30 minutes periods) by pressing " + " o " - " of heating (18) .
When the period desired is selected, change it state by pressing " + " o " - " of DHW
(19)
. The function
will be switched off if symbol is displayed and it will be switched on if symbol is displayed.
After setting all the periods desired, press to save and return to
“Setup menu”
level.
11.2 Heating time schedules
These schedules are only displayed for the zones if there is a room sensor
connected in the corresponding heating circuit. Use this process to adjust
the "Comfort" and "Reduced" heating periods you want for each heating
zone installed in the boiler (
). To deactivate the time programming
for a zone, go to the operating periods selection screen and hold the " - "
Heating symbol
(18)
until you see “ ---- “. In this way, the user can
manually set the desired temperature setpoints for any time during the
day.
11.3 Boiler timer programming
This timer is used to adjust the switching on and off periods of the boiler
functioning. To disable the timer, select boiler timer programming ( )
and set it to “
- - - - “ by pressing " - " of the boiler temperature touch button
(18)
. The boiler timer will be cancelled and it will be switched on
permanently.