DOMUSA BioClass iC DX, Инструкция по установке и эксплуатации

Страница: 29 / 76

29 BIOCLASS iC DX
9 "ICONNECT" CONNECTIVITY
The Bioclass iC DX boiler can be connected to DOMUSA TEKNIK's
"iConnect"
connectivity platform.
Through this option, the user can register the boiler in the iConnect application for Smartphone, Tablets
or similar mobile devices, and use it to remotely manage all the user parameters of the boiler and the
comfort of the heating installation, as well as receive notifications and alarms generated by the boiler, all
from anywhere in the world.
9.1 Requirements for connecting to
iConnect
The electronic control has a Wi-Fi module, through which the boiler will connect to the home's Wi-Fi
network and use it to access the
iConnect platform. As such, there must be coverage from the
home's Wi-Fi network in the place where the boiler is installed. In turn, the Wi-Fi module built into
the Bioclass iC DX boiler is only compatible with 2.4 GHz frequency Wi-Fi networks.
The connection and registration in the iConnect application can be done with any device with an
Android 4.4 operating system or later or iOS 13 or later ( iPhone 6S terminal or later), and must
have a Wi-Fi connection, Bluetooth connection, and enable the location of the boiler. To do so, it
will first be necessary to download and install the free application on said device from the corresponding
application platform,
Google Play (Android) or the App Store (iOS).
If there is no Wi-Fi coverage at the boiler location or if it is too weak, a wide range of different repeater
devices and Wi-Fi network amplifiers are available on the market. Two methods are described below
to expand the coverage of the home's Wi-Fi network:
•
Wi-Fi repeater: Consists of a device that is very easy to install, which collects the Wi-Fi
signal from the home's network and replicates it, expanding the coverage area of the Wi-Fi
network. To do this, the repeater must be installed in an area of the home where there is
Wi-Fi coverage, which is halfway between the home Wi-Fi network router and the boiler,
making sure that the range of the repeater reaches it.
This method is the most recommended due to its simplicity, ease of installation and the fact
that it is cheaper than the other method, as long as the distance between the home router
and the boiler is not excessive.
•
PLC devices: Consists of a pack of 2 or more easy-to-install devices, through which the Wi-
Fi router signal is transmitted through the home's electrical network. One of the devices
connects to the home's Wi-Fi router and is in charge of injecting its signal into the electrical
network through the outlet into which it is plugged. The other devices are plugged into the
house's power outlets where the Wi-Fi coverage is to be expanded, receiving the signal
through the electrical network and converting it into a Wi-Fi signal, and expanding the
coverage area of the Wi-Fi network.
This method is recommended in homes or large buildings with several floors or many rooms,
and when the distance between the router and the boiler is too great to be able to install a
Wi-Fi repeater. Although this method is also easy to install, it is somewhat more laborious
than the previous method, and since at least 2 devices are needed, it is somewhat more
expensive.