DOMUSA TEKNIK BIOCLASS iC 150, Инструкция по установке и эксплуатации

Страница: 42 / 80

EN
42 BIOCLASS iC 150
No. Parameter Display
P.43 Buffer tank hysteresis
P.44 Cascade automatic loading system mode
Entering and adjusting access code ("cod", P.25)
Once the "enter access code ("cod") display is selected or adjusted ( P.25 ),
pressing the symbol will access it and SET will begin flashing, using the
symbols " + " or " - " for heating
(20)
we can navigate through the code
digits. Using the symbols " + " or " - " from HCW
(21)
we can adjust the value
of each digit independently. The factory default access code is "1234".
Parameter
P.25 can be used to set a new desired access code.