DOMUSA TEKNIK BIOCLASS iC 150, Инструкция по установке и эксплуатации

Страница: 32 / 80

EN
32 BIOCLASS iC 150
10.1 Programming process
The BIOCLASS iC 150 boiler allows us to set the timer programming of the boiler. By default, if no
programming adjustment has been made, the boiler will be supplied with the timer programming
disabled, that is, the boiler will keep operating for 24 hours a day (showing on the relevant display the
digits "
- - - - "). The adjustment process described below will be the same for any of the above-
mentioned timer programming mentioned above.
Once you have selected the timer programming you wish to set and by pressing , SET will light up
and flash, starting the adjustment process.
Using the symbols " + " or " - " for Heating
(20)
you can browse through the timer programming in
increments of 30 minutes.
Once the desired scheduling period has been selected, using the symbols " + " or " - " of DHW
(21)
the
programming status will change from "off", displaying the symbol , to "on", displaying the symbol
and vice versa.
Once all the desired time periods are adjusted, pressing the symbol for the last time will save the
programming changes and will return you to the
“Settings Menu”
.
10.2
Timer programming of the boiler
This process is used to adjust the on and off times of the boiler as
required. To disable the timer programming of the boiler, once the
settings of the of the boiler programming are accessed ( ), hold down
the symbol "
- " for Heating
(20)
until “ ---- “ is displayed. In this way
the boiler will stay on permanently.