DOMUSA TEKNIK BIOCLASS iC 150, Инструкция по установке и эксплуатации

Страница: 23 / 80

23 BIOCLASS iC 150
G Special operating icons:
Anti-frost function: This flashes when the boiler's anti-frost function is enabled.
Technical key: This symbol is used to indicate that the value or parameter shown in the
numerical display is of a technical nature. It appears when any of the boiler's
technical settings on the
"Technical Menu"
or
"Settings Menu" are being browsed
or modified.
.
H Auxiliary icons:
Display of a temperature value (in international units) in the numerical display.
bar Display of any value or parameter relating to water and/or air pressure (in international units) of
the boiler.
I Temperature icons from the buffer tank or hydraulic needle:
Upper temperature probe of the buffer tank or Scol. needle.
Intermediate temperature probe No. 1 of the buffer tank Sbt1.
Intermediate temperature probe No. 2 of the buffer tank Sbt2.
Lower temperature probe of the buffer tank Sdown.
J Operating mode icons:
Display of any value or parameter related to operation according to the pending load of the
buffer tank.
Display of any value or parameter related to the boiler and/or burner.
Display of any value or parameter related to the functioning of the boiler fan.
Display of any value or parameter related to the weighing of fuel, fuel feeder calibration,
mass consumption of the boiler, etc.
Display of any value or parameter related to the fuel suction system. When the fuel suction
system is active the flashing symbol is displayed.
Display of any value or parameter related to the ash deposit.
Display of any value or parameter related to the ash deposit overflowing with ashes.
Display of the fuel feeder activation.
Display of any value or parameter related to the temperature or operation of the buffer tank.
Indication that you are browsing inside one of the electronic control menus.
SET Indication that the parameter shown on the numerical display can be changed.