PSS5000/TEMA/803046/14
PSS 5000 – Technical Manual
5 Installation (Menu 2)
Emergency access to the
PSS 5000
In case passwords are forgotten it is possible to gain access in two different
ways:
•
‘To use Doms password for a day’ on page 54
•
‘To use the default user password with local service panel’ on page 54
These methods make it possible to restore the fixed passwords to the wanted
values, or to give temporary system access to a person on the site.
To use Doms password
for a day
The
doms
user has the same privileges as the
admin
user but uses a special dy-
namic "Doms password of the day". This password has 4 HEX characters (0–
9, A–F) and can be obtained by contacting Doms Support.
The PSS 5000 has a password validation routine in the Legal Authority Mod-
ule with fixed user_id/password combinations. The default password for all
users is "password".
To use the default user
password with local
service panel
All original user default passwords (
password
) can be re-enabled temporarily
from the Local Service Panel. This enables a technician, who has access to an
open box, to always get access to the system. Protection of the physical access
to the room or the box itself is outside the scope of this documentation. The
box can be behind a locked door or the box can be locked. The default pass-
words will be active until disabled manually again from the Local Service Pan-
el or until the end of the current day. This procedure describes how to use the
Local Service Panel to select the default user password of the PSS 5000.
1.
Press
to move to the
INFORMATION 1
menu.
2.
Press , , , , ,
to
move
to
the
DEFAULT PASSWORD 2.4.1
menu.
3.
Press
to move to the
ENABLE D.PASSW?
menu.
4.
Use the
and
buttons to toggle between
YES
and
NO
.
5.
Select
YES
and press
OK
to make the changes.
