Domotec DSG33, Инструкция по эксплуатации

Страница: 7 / 15

Fill Water Tank
1. Press upwards the release button at the
water tank and slide the detachable water
tank outwards from the base. (See Fig.1)
2. Fill the water tank up to or below the
“MAX” fill line with the clean tap water.
(See Fig.2)(You can take filter out of the
opening for filling water into water tank,
(See Fig.3) or fill water into water tank
directly with the filter existing in the
opening.When empty the water tank will
take 1 litre of water.
3. When empty the water tank will take one
litre of water replace the water tank into
the base unit again. It will be locked in
place with the base unit when a “click”
sound is heard. (See Fig.4)
4. Always pour out the remaining water
after use.(See Fig.5)
Note: When the water level reaches a low
level or empty, pump will provide sound
to indicate refilling. Stop using the
appliance immediately and refill water
tank using the methods mentioned
above.
Steam function setting
After power on, if steam is necessary, set temperature control dial to steam
ironing position according to fabric setting chart.When temperature control dial
is set at “ ” or “Max” position. Steam adjustable knob should be set at
“MIN” ~ ” ” range. When temperature control dial is set at “ ” , steam
adjustable knob should be set at “MIN” position. If water leakage happens
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Click
MAX