Domotec DSG33, Инструкция по эксплуатации

Страница: 12 / 15

2. Filter should be replaced with a new one after about 2 months’ use.(base: 1.
0L / times x 2 times / week) Working life of filter depends on local water
you used. If working life exceed its Max limit, the appliance can be used
continuously, but limescale will be built up in steam chamber. So you
should replace the filter as soon as possible or mix your tap water with
distilled water at a proportion of 50%,if your local water is hard .
Emptying and storing
1. After use, slide out the water tank and pour out all the remaining water.
(See Fig.12)
2. Disconnect the appliance from the power supply and allow the appliance to
cool down for 60 minutes at least.
3. The iron should be placed on the iron rest plate of the power base and they
should be stored together.
Cleaning and Maintenance
1. Unplug the appliance from the main supply and let the iron cool down.
2. Clean the iron with a damp cloth. (See Fig.13)
3. Wipe off scale and any other deposits on the soleplate with a damp
cloth or non-brasive(liquid) cleaner.
4. Never clean the appliance under the tap.
5. Since steam vents are small,to prevent steam vents being blocked by
limescale, please clean steam vents with a 1.5mm steel pin after every 3-5
monthes’s use.(See Fig.14)
Fig.12 Fig.13 Fig.14