Domotec DSG33, Инструкция по эксплуатации

Страница: 8 / 15

during use, set temperature control dial at higher temperature position or steam
adjustable knob to lower position. When temperature control dial set at “ ”, do
not use steam ironing, otherwise, water leakage will happen from soleplate.
Steam ironing cannot be activated until heating indicator light turns off.
Steam ironing
1. Fill the water tank with clean tap water refer to above filling instructions.
( Note: For every first use of the filter, please immerse it in water for better
performance)
2. An empty tank will accept one litre of water, connect the appliance into
suitable socket outlet. Press the power switch at base control panel until
power indicator light turns on to show the connection of the power supply.
3. Set temperature control dial at the steam ironing setting according to fabric
setting chart. The temperature indicator light comes ON to indicate the iron
being heated up(Refer to image), when temperature indicator light OFF ,the
required temperature has been reached, the unit is ready for use. During
use, it is normal that the temperature indicator light will cycle from ON to
OFF and then OFF to ON.This shows that steam chamber automatically
keeps temperature constant.
4. Before every first use, the iron should be cleaned using following
procedure: Select adjustable steam knob to Max steam setting, hold the
iron and press the steam switch underneath the handle for 20 seconds, and
then release for 30 seconds, do this for two cycles. When heating indicator
light OFF, it is ready for ironing. This process ensures optimal performance
of the iron throughout its life.
5. During steam ironing, adjust steam rate according to requirements based
on above steam function setting
6. After use, turn temperature control dial to “MIN” ,put iron back onto base
unit, Switch off the unit by pressing the power switch and then unplug the
appliance from the outlet.