Domotec DSG33, Инструкция по эксплуатации

Страница: 9 / 15

7. Take water tank out of the base unit and pour out remaining water from
water tank.
NOTES:
a. For every first time use, it is normal that a slight vibration sound may be
heard from electrical pump inside the base unit for a few seconds when
steam ironing is started. It is because the water is being pumped into the
heating chamber. If this happens for more than 30 seconds, please check
whether water tank and filter assembled correctly or not.
b. Every first time use, please set adjustable steam knob to Max position to
allow steam escape quickly
Dry Ironing
1. Connect the appliance to a suitable socket outlet. Press the power switch at
base control panel until power indicator light turns ON to show the
connection of the power supply.
2. Turn steam control dial at the iron to desired position according to fabric
setting chart, The iron’s red light will go on to indicate the iron being heated
up. It will go off when the required temperature is reached. During the dry
ironing stage, the temperature indicator will cycle from ON to OFF and then
OFF to ON automatically because the iron is automatically maintaining sole
plate temperature.
3. After use, turn the temperature control dail to “MIN” position. Then, turn off
the power switch and unplug the appliance from the outlet.
Note:
When changing your Temp setting from high setting to lower, not to start
ironing immediately as your fabrics may be burnt by the by high temperature.
The unit should not be used until temperature indicator light on iron unit ON .
Otherwise burns will be caused to your fabrics.