Domotec DSG33, Инструкция по эксплуатации

Страница: 6 / 15

6. If you do not know what kind of fabric the article is made of, iron a piece of
the material which is not visible when you wear to find out the appropriate
temperature for your articles.
7. Pure woollen fabrics (100% wool) should be ironed with the iron setting to
steam ironing position. It is advisable to set the temperature control button
to “Max” position and use a dry pressing cloth.
8. When steam ironing woollen fabrics, shiny patches may occur. You may
prevent this by turning the article inside out and ironing the reverse side.
9. After ironing cotton fabrics, do not iron articles reguring lower temperature
(such as nylon etc.) Immediately. It is advisable to adjust the temperature
button to the lower setting, waiting for about 2-6 minutes till the power
indicator light turn on and then turn off, and then you can start ironing.
IMPORTANT HINTS
Do not fill water tank with vinegar, perfume, starch, chemically descaled water
or descaling agents, THIS WILL INVALIDATE THE WARRANTY.
Prepare the appliance for use
1. Check if the voltage indicated in the rating plate corresponding to the main
voltage in your home.
2. Fully unwind and straighten the power cord and the supply hose.
3. Place the appliance on a stable, level and horizontal surface such as ironing
board.
4. Iron should be well placed on iron rest,(shown as Fig.A) do not allow its
soleplate touch iron test. (shown as Fig.B)
Fig.A Fig.B