DO9201I
45
www.domo-elektro.be
funcionando.
6. Para detener el proceso por completo y volver al estado básico del principio,
mantenga pulsado el botón de ENCENDIDO/APAGADO durante más de 3
segundos.
7. Cuando ha transcurrido el tiempo establecido, el aparato dejará de funcionar
automáticamente y dará 3 pitidos. La pantalla LCD mostrará “00:00” y la luz de
fondo parpadeará.
8. Saque el helado del cuenco con una paleta de plástico y ponga el helado en
otro cuenco o recipiente. No utilice objetos metálicos para evitar arañazos en el
cuenco.
Precaución: No golpee el cuenco extraíble o el borde del cuenco sobre una mesa,
por ejemplo, para eliminar el hielo. Así puede prevenir daños.
Atencion: Si después de 60 minutos moviendo, el helado queda ligeramente blando,
puede enfriarlo en ese momento con la función Cooling Only (solo enfriar) durante
unos 30 minutos para darle una mayor consistencia. Puede adaptar este uso conforme
a sus preferencias.
Función de refrigeración prolongada
Si el aparato no está apagado y el hielo no se retira dentro de 10 minutos después
del final del proceso de giro, la máquina cambia automáticamente al modo de
refrigeración. Entonces, el aparato refrigera durante un total de 1 hora - en intervalos
de 10 minutos - con el fin de mantener la consistencia del helado. Después vuelve al
estado básico.
Ajuste del tiempo durante el proceso de giro
Cuando la máquina está en funcionamiento puede aumentar o reducir el tiempo
fácilmente girando el botón giratorio.
Añadir tiempo después del proceso de giro
Cuando la máquina heladora ha terminado el proceso de giro y vuelve al estado
básico, se puede reajustar el tiempo y pulse el botón ENCENDIDO/APAGADO para
dejar girar el helado algún tiempo más. Por ejemplo, porque aún no está bastante duro.
Función de auto-protección del motor
Cuando el helado está demasiado duro el motor se puede bloquear. La función de
auto-protección garantiza que el motor no se apague automáticamente.
LIMPIEZA
• Limpie la carcasa de acero inoxidable con un paño húmedo y detergente suave.
• Lave los siguientes componentes con agua caliente y lavavajillas: la tapa
transparente y el cuenco extraíble. Las demás piezas que no se encuentran fijas en
el aparato (espátula, cuchara y vaso medidor) se pueden lavar en el lavavajillas.
Downloaded from www.vandenborre.be