DO9201I
38
Tip: After 60 minutes on the Ice Cream function, it’s possible for the ice cream to still
be a bit soft. If you like, however, you can use the Cooling Only function for about 30
minutes to give the ice cream a stronger consistency. You can of course adjust this to
your own preferences.
Prolonged cooling
When the appliance is not switched off and the ice cream is not removed within 10
minutes after the end of the mixing process, the appliance will automatically switch
to prolonged cooling. The appliance will cool for another hour in total - with intervals
of 10 minutes (cool for 10 min., rest for 10 min.) - to maintain the consistency of the
ice cream. After this hour, the ice cream maker will switch back to its initial start-up
status.
Adjusting the time during the mixing process
When the appliance is operating, you can simply adjust the duration by turning the
turning knob either to the left or to the right.
Adding time after the mixing process
When the mixing process has ended and the appliance has switched back to its initial
start-up status, you can set the time again and press the START/STOP button to mix
the ice cream a little longer. For example because it was not hard enough yet.
Self-protection function of the motor
When the ice cream becomes too hard, the motor could get blocked. The self-
protection function makes sure that the motor is automatically stopped in that case.
CLEANING
• Clean the stainless steel housing with a damp cloth and some mild detergent.
• Wash the following loose parts in warm water with soap: transparent lid and
removable bowl. The other loose parts (spatula & measuring cup) may be washed
in the dishwasher.
Downloaded from www.vandenborre.be