Domino Gx-OEM, Руководство по эксплуатации продукта

Страница: 83 / 198

Speed = Distance Between Photocells ¸ Time Between Photocell Triggers
1. Notes To use a photocell encoder, ensure the "Print speed mode" of labels that are
sent to the print group is set to "External". see Label Settings on page 134 .
2. The print speed of the first label is set by the label's "Production speed (m/
min)" setting. see Label Settings on page 134 .
To setup two photocell encoders:
1. If the print group is active, stop the print group. Select STOP , select the print group and
select Stop .
2. Make sure the photocell furthest away from the print head is correctly connected to one of
the controller's I/O inputs:
Controller Type Connection Type
Connection Example
Page Reference
Gx-IC7 NPN see NPN Input on page 39 .
Gx-IC7 PNP see PNP Input on page 40 .
Gx-IC10 or Gx-OEM NPN see NPN Input on page 48 .
Gx-IC10 or Gx-OEM PNP see PNP Input on page 49 .
3. Assign the input function of the photocell furthest from the print head to "Preceded
Product Detect", see Inputs on page 82 .
4. Make sure the photocell closest to the print head is correctly connected to one of the
controller's product detect inputs:
Controller Type Connection Type
Connection Example
Page Reference
Gx-IC7 NPN see Product Detect Sensor NPN
Connection on page 39 .
Gx-IC7 PNP see Product Detect Sensor PNP
Connection on page 39 .
Gx-IC10 or Gx-OEM NPN see Product Detect Sensor NPN
Connection on page 47 .
INSTALLATION
EPT053091 - Issue 5 - 07 May 2021 78