Domino Ax Series, Пользовательская документация

Страница: 120 / 167

OPERATION
4-46 EPT019297 Issue 1 November 2016
Add a Segment
To add a segment into a label design:
(1) In the Label Creator , select Segment at the top of the screen.
(2) In the side menu, select the Segment tab.
(3) Select the Add menu.
(4) Select the Add Segment icon.
(5) The following segment settings can now be defined:
End of procedure.
Setting Name Explanation
Number of lines Select the required number of lines, 1, 2, 3 or 5.
Line height (drops) Select the required height for each line in ink drops.
Type Select the required label quality.
Use default height (%) Tick the tick box to use the default print height setting.
Untick the tick box to display the Height (%) setting.
Height (%) Note: This setting is only valid if the Use default height (%)
tick box is not ticked.
Set the print height percentage.
Use default stroke pitch Tick the tick box to use the default stroke pitch setting.
Untick the tick box to display the stroke pitch (mm) setting.
Stroke pitch (mm) Note: This setting is only valid if the Use default stroke pitch
tick box is not ticked.
Set the distance between print strokes. A stroke is the line of ink
drops which is used to make up each printed character.