Domino Ax Series, Пользовательская документация

Страница: 101 / 167

OPERATION
EPT019297 Issue 1 November 2016 4-27
(5) Select the Save icon to save the setting.
End of procedure.
Continuous Continuously repeat print the label when a constant print trigger
signal is received by the printer. The printer will stop printing when
the print trigger signal stops. When this option is selected, the
settings described below will also be displayed:
Repeat spacing mode - Select how the distance between each
print is measured. Select,
Space by pitch to measure the distance
in print strokes. Or, select Space by gap to measure the distance
using the gap between characters.
Repeat spacing - Set the distance from the start of one print to
the start of the next.
Repeat: Update each print - Tick to update clock and counter
information each print. Or, Untick to keep the same information on
each print.
Repeat: End of product - Define when and how to stop
continuous print. Select
Complete to complete the next print.
Select Cancel to stop before the next print.
Setting Name Explanation