Dometic HC302D, Руководство по эксплуатации

Страница: 18 / 84

EN
Installing and connecting the refrigerator HC302D, HC502D
18
6.3 Installing built-in version
!
Observe the following instructions when installing:
•
Install the refrigerator so that the warm air produced can easily flow away (either
upwards or to the front, fig.
3
, page 4).
Key to fig.
3
, page 4
•
Make sure that the refrigerator door is able to open at least 100°. Otherwise the
drawers cannot be used.
➤
Check the dimensions of the device (fig.
a
, page 8 or fig.
b
, page 9).
➤
Place the device according to fig.
4
, page 5 or fig.
5
, page 5.
➤
Mount the device to the furniture by two screws through the fittings at the bottom
(fig.
6
, page 6).
➤
Leave the device to stand for at least four hours before you connect it to the
power supply so that the refrigerant can flow back into the compressor.
CAUTION!
Ensure the shelf is adequate to carry the total weight of the refrigerator
and the medicinal products to be stored.
No. Explanation
1 Cold intake air
2 Hot waste air
HC302D-502D-IO-WEST.book Seite 18 Freitag, 17. März 2017 2:15 14