Dometic HC302D, Руководство по эксплуатации

Страница: 20 / 84

EN
Using the refrigerator HC302D, HC502D
20
6.6 Installing an external alarm
Use the floating contacts at the back of the device as follows:
•
The upper contacts correspond to the power fail alarm (fig.
9
1 and 2, page 7).
•
The lower contacts correspond to the temperature alarm (fig.
9
3 and 4,
page 7).
A voltage between 12 V and 250 V can be connected at the contacts. The maximum
load must not exceed 8 A. The minimum power rating is 100 mA/5 V.
I
7 Using the refrigerator
I
7.1 Energy saving tips
•
Choose a well ventilated location which is protected from direct sunlight.
•
Do not open the refrigerator more often than necessary.
•
Do not leave the doors open for longer than necessary.
•
Defrost your refrigerator as soon as a layer of ice forms.
NOTE
The external alarm signal can only be switched off by eliminating the
cause of the alarm.
NOTE
•
Before starting your new refrigerator for the first time, you should
clean it inside and outside with a damp cloth for hygienic reasons
(please refer to the chapter “Cleaning and maintenance” on
page 25).
•
Always leave some space between the medicinal products in the
refrigerator to ensure efficient and even cooling. If the drawers are
packed too tightly there may be unacceptable temperature values.
•
Keep these operating instructions ready at hand and leave them with
the device, so that all users can find out about the functions and
safety regulations.
HC302D-502D-IO-WEST.book Seite 20 Freitag, 17. März 2017 2:15 14